Canon EOS Rebel G 35mm film SLR w/ Canon EF 35-80 lens (serial 1263926)
Canon EOS Rebel G 35mm film SLR w/ Canon EF 35-80 lens (serial 1263926)
The Canon EOS Rebel G is a compact, very lightweight, and easy-to-use autofocus 35mm film SLR camera from 1996. When using its 'auto' mode, the camera is as simple to use as a point-and-shoot but should you wish to go further, it offers a wide array of modes and manual controls. The included Canon EF 35-80mm f4-5.6 zoom is a compact, lightweight, general-purpose lens.
Like the other Canon EOS 35mm film SLRs, the Rebel G is a good choice for anyone who already owns a Canon digital SLR as it works with the same lenses (provided that they're the full-frame type).
Battery info
This camera requires two CR123 lithium batteries (available as an option).
Condition notes
The camera and lens are in good cosmetic condition (see photos). All functions are working correctly. We verified that both the camera's shutter and auto-exposure are working with good accuracy.
Canon Museum entry
https://global.canon/en/c-museum/product/film190.html
Manual
https://www.cameramanuals.org/canon_pdf/canon_eos_rebel_g.pdf
Specifications
- Type: 35mm focal-plane shutter multi-mode AF SLR camera
- Picture Size: 24×36 mm
- Normal Lens: Canon EF lenses
- Lens Mount: EF mount
- AF System: TTL phase detection. AF modes: One-Shot AF/Predictive AI Servo AF (automatic switchover). Multi-BASIS (|+|) for the AF sensor. Three focusing points selectable by dial operation or by the camera automatically. AF operating range at ISO 100: EV 1.5 – 18. In-focus indicator lights on the LCD in the viewfinder and on the external LCD panel (beeper can be turned off/on).
- Shutter: Vertical-travel, focal-plane electronic shutter. 30 sec. – 1/2000 sec., B. X-sync at 1/90 sec. In the manual and shutter speed-priority AE modes, the shutter speed can be set in 1/2-stop increments. Hot shoe provided for flash sync. Built-in electronic self-timer.
- Viewfinder: Fixed eye-level roof mirror. 0.7x magnification, 90% vertical and horizontal coverage.
- Viewfinder Information: Shutter speed and aperture setting (blinks as a warning when the exposure is incorrect) displayed by 7-segment yellow LED. Blinking shutter speed display is a camera-shake warning. Three focusing points (superimposed), in-focus indicator, exposure display dots (exposure compensation amount, metered manual exposure, autobracketing amount, red-eye reduction lamp-ON indicator, flash ready, high-speed sync, shutter speed setting and control value, and aperture setting and control value are displayed with a yellow-green LED. Panorama frame (New EOS Kiss only).
- External LCD: Film-loaded indicator, film rewind-completed indicator, manual focus, exposure display, shutter speed, aperture setting and control value, film speed, battery check, and other indications.
- Metering & Exposure Control: Composite SPC for TTL full-aperture metering (6-zone evaluative, 9.5% partial metering at center [set automatically during AE lock]) with shutter speed-priority AE, aperture-priority AE, shiftable Intelligent program AE, five program AE modes, depth-of-field AE, and metered manual. Manual exposure compensation range of ±2 EV (in 1/2-stop increments). AE lock enabled with a button. Autobracketing range of ±2 EV (in 1/2-stop increments) for three consecutive frames. Metering range at ISO 100 and f/1.4: EV 2 – 20. Film speed range: ISO 25 to 5000 (in 1/3-stop increments with DX code). Maximum 9 multiple exposures (cancellable manually).
- Built-in Flash: Located on pentaprism hump. Retractable head. TTL autoflash control (fires automatically in backlight and low-light conditions in the Full Auto and three Programmed Image Control modes) with off-the-film metering. Flash sync speed set automatically anywhere from 30 sec. to 1/90 sec. depending on aperture setting. Fill-flash enabled. Red-eye reduction lamp provided. With the optional Canon Speedlite 220E or 380EX, the camera’s AE lock button fires a preflash. The resulting reflection off the subject is metered (partial metering at center) by the AE sensor to determine the flash output. FE lock can also be controlled in this way. Guide No. 12 (at ISO 100 in m).
- Power Source: Two 3 V CR123A lithium batteries
- Film Loading &
- Advance: Align film leader at mark, then close the camera back for prewind loading. First, the entire roll is wound on the take-up spool. Then each time a picture is taken, the film advances back into the cartridge. Film transport with the built-in motor. Film advance speed: 1 fps. After the last frame is exposed, the film is rewound automatically. Midroll rewind enabled.
- Frame Counter: Counts down on external LCD panel (counts up during film rewind).
- Dimensions & Weight: 146 x 92 x 62 mm, 400 g (with batteries)